Battery

GODEX EZ 4TT DRIVER

Turn over the head assembly. Wait for about 3 seconds; the printer will print the following contents. Printing stops and LED turns Software setting or programming problem. Whatever media in used, the recommended minimum label height is 20 mm. To print the manual completely, please, download it. Press the printer locks part 12 to loosen the printhead assembly, and turn over the head assembly.

Uploader: Dolrajas
Date Added: 27 February 2014
File Size: 58.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 6673
Price: Free* [*Free Regsitration Required]

Comments to this Manuals Your Name. Vertically place the two stands along the left side and right side of the back cover see Fig. Press the printer lock part 14 to loosen the printhead assembly. By pressing ‘print’ button you will print only current page. The paper jam may cause the cutter work improperly, power off the printer. Stripper Goded Peeler helps you separate the printed label from the liner backing paper.

Printing stops and LED turns Software setting or programming problem. Turn over the head assembly.

  ASUS P4PE I845PE DRIVER

Open the front cover and back cover. This manual also for: Adjusting the Printhead Pressure Screws decrease pressure increase pressure When opening the front cover, you can see two screws on the top of the printhead assembly.

Perform a Label Gap Sensor Adjustment as described on page Refer described on page 5. Don’t have an account? Load large label roll Open the front godez back cover.

Godex EZ-4TT Manuals

Cutter We suggest that the minimum label height be more than 35 mm. Disable the Self-test, 4yt power off the printer at least 2 seconds, than power on again. Number of data bits 7 or 8 p4: Got it, continue to print.

These limits are designed to provide reasonable protection godec harmful interference when the equipment is operated in a commercial environment.

Don’t show me this message again. Enter text from picture: Use a soft cloth soaked with isopropyl alcohol to remove the stuck label and cleans the surface.

Wait for about 3 seconds; the printer will govex the following contents. Adjusting The Printhead Pressure Screws With different paper material or ribbon material, you may need to adjust the printhead pressure by turning these two screws to decrease or increase the pressure. Put back the printhead and fasten it.

  MICRONET SHUTTLE 3000 56K MODEM DRIVER DOWNLOAD

Godex EZ-4TT Manuals

Press the printer locks part 12 to loosen the printhead assembly, and turn over the head assembly. To load a label roll onto the roll core part In case of non heat-sensitive paper, a suitable thermal transfer ribbon must be used. Page of 17 Go. Maintenance and Adjustments Whatever media in used, the recommended minimum label height is 20 mm. Setting up Your Printer If you need any help in installation and maintenance, please consult your supplier or dealer.